Tomboy installation.
-
- Posts: 10
- Joined: 17 Feb 2018, 14:24
Tomboy installation.
This may seem like a daft question for all you experts out there but I have just become the owner of a FF Tomboy that I wish to convert to SC. I want to put the rudder servo so that it operates the old fashioned swing system, a la rubber driven escapement but I can't work out how to do it. Any ideas chaps?.
-
- Posts: 37
- Joined: 17 Feb 2018, 04:57
Re: Tomboy installation.
Go here :- http://www.singlechannel.co.uk/ then click on "Models" in the menu bar, about 3/4 down the page you will see single ch servo to torque rod instalations
-
- Posts: 10
- Joined: 17 Feb 2018, 14:24
Re: Tomboy installation.
Thanks Stuart. Two methods, brilliant.
Cheers.
Mike.
Cheers.
Mike.
- PaulJ
- Posts: 605
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: Tomboy installation.
Just to confuse the issue, this is how I do it.......
Paul
Paul
- Phil_G
- Posts: 629
- Joined: 15 Feb 2018, 23:32
- Contact:
Re: Tomboy installation.
Loads of options. I just bind a tube (earbud stalk) to the servo arm and arrange it pointing down at neutral.
The torque-rod has a small bend vertically down and drops into the tube. Meercats
However, for ease & simplicity you could do a string-pull-rubberband-return thing.
The torque-rod has a small bend vertically down and drops into the tube. Meercats
However, for ease & simplicity you could do a string-pull-rubberband-return thing.
-
- Posts: 10
- Joined: 17 Feb 2018, 14:24
Re: Tomboy installation.
How many more solutions are there ? Thanks for all so far.