Gem TX label plate FOC
Posted: 12 May 2024, 16:24
If anyone wants a label plate, I made a spare when making one for my GEM TX.
They are printed on high res self adhesive paper then stuck onto 1.5mm card and then laser cut into shape. Finished with a coat of lacquer
Just let me know and I’ll pop it in the post.
I’m replacing the one on the TX as I’m doing away with the L/R led. Not really needed plus my original label was made of plasticard and is not as accurate as the laser cut one.
Ron.
They are printed on high res self adhesive paper then stuck onto 1.5mm card and then laser cut into shape. Finished with a coat of lacquer
Just let me know and I’ll pop it in the post.
I’m replacing the one on the TX as I’m doing away with the L/R led. Not really needed plus my original label was made of plasticard and is not as accurate as the laser cut one.
Ron.
